With help from Sam McCulloch.
Recently, we spent a fascinating weekend driving around the Tyrone area with retired geologist Sam McCulloch, who was seeking fall colors and beautiful scenes he might capture on film.
In the Beginning…
It all began tens of millions of years ago, as the earth was cooling. The continents had become solid masses of different layers of sediment that settled on the flat surface. The continents were low and often beneath the oceans where they received more layers of sediment. Limestone, iron, and dozens of other layers are the products of these deposits.
Imagine two pieces of wood floating in water. In this way, the continents floated on the molten core of the earth. Look at a map of the world or a globe, and you’ll immediately notice how the western side of the continent of Africa looks like the eastern profile of North and South America. That’s no coincidence. The African continent “floated” over and collided with the Americas. What resulted are the mountains of Appalachia that we see today!
Ripples
As Africa pushed against North America, giant ripples were formed as the land and rock layers buckled under this immense pressure. These ripples were roughly parallel to the coastline, but took place several hundred miles inland.
What we see today are not those ripples, but the remaining parts of the upward and downward parts of the ripples that geologists call anticlines and synclines. The anticline part has eroded away leaving the wonderful valley areas today that lie between what we call mountains. These mountains are higher today because the rocks in them are more resistant to erosion than the rocks on either side of them. They are formed of Tuscarora quartzite (sandstone) in this area; chunks of it cover many mountainsides in central Pennsylvania, where they are referred to as “ganister flows.”
Many of the mountains in this area are twins. Two sides of an anticline or syncline make the twin ridges that ultimately merge along their length into a “point” at the end of the folded rocks. Their characteristics are identical, because they’re composed of the same rock layer. Tussey Mountain and Bald Eagle Mountain are twins, as they are two sides of a giant fold.
For a relatively short geologic period before it all eroded out in the middle, the giant ripple would have been a single mountain perhaps thousands of feet in height. The flat land of the Bald Eagle Valley to the east of Tussey Mountain was partially filled in with some of the eroded sediment from the top of the fold.
Ours Is the Final Ripple
If you look at a relief map, you’ll notice that Tussey/Bald Eagle Ridge was the westernmost of these ripples. The Allegheny Mountain Front to the west of Tyrone wasn’t shoved out of shape, but it has a westward tilt. Thus, water beyond Ice Mountain flows west and down the Mississippi River. It’s a different world. Only two relatively small wrinkles in the rock layers had developed west of here: Laurel Mountain and Chestnut Ridge.
The Vail ‘Fault’
While all this pushing and shoving was taking place, “faults” developed where the rock layers failed and broke under the great stresses applied by the push from Africa. Just like what is still happening today when earthquakes cause land to shift, giant pieces of “our mountain” cracked and twisted. If you drive out the back road to Vail, and stop before crossing the tracks, you can see a perfect example of a “fault.” Bald Eagle Mountain is coming from the right, straight from the “break” at 10th Street, where water found a way out. Then, abruptly, there in front of you, that stretch of the mountain simply stops. The same mountain shifts east several hundred feet and continues to the northeast.
Layers of Iron
The layers of sediment (sandstone, shale, and limestone) that were deposited in the sea are present everywhere. They are visible because of the erosion on the sides of mountains. Iron ore in the Clinton Sandstone in the valley between Tussey and Bald Eagle Mountains was discovered by early pioneers. Mining it drew thousands of families here; it was the reason for the Pennsylvania Canal, and later, the decision to locate the Pennsylvania Railroad through here (and not across the bottom of the state or through West Virginia).
All the trees on the hills and mountains were timbered for charcoal to process iron ore. If you look at very old photographs, you’ll see very few trees; there probably are no virgin forests within many miles. All of this provided tens of thousands of jobs and drew most of our ancestors to “this place we call home.”
The presence of iron ore in our mountains has been known since Colonial times. Often associated with iron beds is iron disulphide (FeS2), known as iron pyrites — commonly called fools’ gold. Pyrite can become toxic when exposed to water, causing sulfuric acid to form. To the northeast of Tyrone, the new highway project must deal with the problem of an excessive deposit of pyrite where the highway crosses these iron-bearing beds of rock.
Fertile Valleys
Have you ever wondered why the Warriors Mark and Sinking Valley areas have so much more topsoil and are much better farming areas? The fertility of an area often is governed by the type of bedrock underlying the area. Various rocks disintegrate into their own characteristic soil types. Sandstone and limestone areas usually are better in forming soils good for farming, although sometimes the soil can be rocky in these areas. Shale underlying a valley can make muddy soil and not be the best for farming.
Share your memories