You’ve heard of “The Smoky City,” as Pittsburgh was dubbed when coal burned in the steel mills of the Three Rivers area. That’s gone now as steel-making switched to natural gas and largely ceased to dominate the industrial spectrum of western Pennsylvania.

But come with me to another era when it wasn’t Pittsburgh that was constantly smoky, but were our beloved valleys and hills of central Pennsylvania. The smoke disappeared a hundred years ago after a century during which our area was the supplier of a major portion of the steel products that were used in our young nation.

Signs Still Mark Some of the Sites

Unless you’re watchful, you may miss the historic signs along various roads that invite you to stop and look at a relic of the era long gone. “Juniata Iron” is how the signs tell us how widespread those iron furnaces and forges were throughout this area we call home.

We seldom pay attention to the names of towns and villages. You may have heard of Pennsylvania Furnace, or Huntingdon Furnace, and driven past Rock Hill Furnace or Etna Furnace. And, you may have seen markers identifying places such as Tyrone Forge and Cove Forge. But, unless you actually stopped and looked around, you may have missed the remains of an old iron furnace or failed to recognize the beautiful homes of the ironmasters that stand at places through central Pennsylvania.

A Century of Progress

Truly, for a hundred years, this part of Pennsylvania was known as “The Smokies,” before that name was given to the mountains in Tennessee and North Carolina. And, the reason for their name was not because of anything that civilization brought, but because of the natural hazy condition that prevails so much of the time. Ours was because of the burning of trees to make iron.

Let’s go back in time to 1785, long before anyone but Chief Logan had ever lived here in the Tyrone area. The trail over Janesville Mountain was used by traders and a few settlers, but Tyrone was just a place where the river and the creek met and cut through the mountain. And, as you’ll hear, Tyrone probably wouldn’t even exist if it hadn’t been for Juniata Iron.

It all began at Orbisonia, in southern Huntingdon County. In 1785 the first iron furnace was built, and was called the Bedford Furnace, possibly because all of this area was in Bedford County at the time.

Trees, Water, and Ore

Because of the abundance of trees throughout this area, as well as the abundance of iron ore, iron furnaces sprung up “everywhere.” The second furnace was built at Barree, which is on the other side of the Spruce Creek Gap in Tussey Mountain. Soon, a furnace was built on this side of Tussey. It was built at Huntingdon Furnace, along Warriors Mark Run. After it was completed, the builders agreed that the location was poor, so it was relocated a mile downstream. What you see now is the later furnace.

Ironmasters had to find a site where a rapidly moving stream could be used for motive power. The water would turn the wheel that would provide the power. Either an overshoot or an undershoot water wheel would be designed, depending on the amount of drop in the stream as it passed the furnace or forge area. As you can imagine, an overshoot was much more powerful.

Forges, Including One Built by a Future Governor

At the beginning of “Juniata Iron,” the furnaces produced very simple iron bars, which were transported to another place to be reheated and formed into usable iron products. This was done at forges. Within relatively short time, ambitious “men of iron” perceived that the abundance of wood here, which, when converted to charcoal, made the best possible heating medium. This resulted in many forges being built. These actually “forged” or shaped iron products of a wide variety — almost anything that the market demanded. Thus, instead of shipping raw iron bars to other places, the forges put out finished products.

The first one, “Juniata Forge,” was built in 1804, or about twenty years after the first furnace. The Coleraine Forge (later spelled Colerain) went into operation a year later, along with Etna Furnace and Forge. Then, the Franklin Forge was built and operated by the Wigton family. The Wigton Farm is a familiar landmark these days in the beautiful Spruce Creek Valley. Maria Forge and Millington Forge also were built along Spruce Creek in the 1810s by David Porter, who later became Governor of Pennsylvania.

Unbridled Growth of Iron Industry; Founding of Tyrone

Still more iron furnaces and forges were built. Pennsylvania Furnace was built in 1813, Springfield Furnace in 1815, and Rebecca Furnace in 1817. Quickly, the Upper and Lower Tyrone Forges were begun, and a nail factory was built nearby.

Ironmaker Lynn Shorb came to the area and built Bald Eagle Furnace in what is now Snyder Township. The original name for the little village created near the Big Spring was Shorbsville. Later, thankfully, the community was renamed Tyrone City, and then shortened to Tyrone.

The Bald Eagle Furnace was a gigantic operation. One historian said that during its years of operation, this one iron furnace consumed 1,000 acres of timber!

The Tyrone-Spruce Creek Valley area was one of the major iron-making regions throughout the entire Juniata Valley. At the peak of production, the Spruce Creek Valley had Elizabeth Forge, Millington Forge, Stockdale Forge, Little Beck Forge, and Bald Eagle Furnace.

Little Juniata Furnaces Rivaled Those of Spruce Creek

The Little Juniata River, from Altoona down to Tyrone and on to its juncture near Petersburg, had these iron furnaces and forges: Juniata Forge, Elizabeth and Mary Ann, Antes (near Bellwood, and later changed to Antis), two at Tyrone Forge, Bald Eagle Furnace, Cold Spring, Union Furnace, and Barree.

By 1855, there were thirty-three iron furnaces and forges listed in Blair County, and twenty-five in Huntingdon County.

Centre County, Including the “Sisters”

One of the early iron furnaces still stands and is very visible as you drive by on the Benner Pike just north of State College. The ironmaster’s home is also preserved and is used as a public building.

When Col. Alexander Bobb married Matilda Mattern of Centre County, the famed “sisters” began. If you travel down the Bald Eagle Valley from Tyrone, you will pass communities named for the furnaces that were operated nearby, and named for sisters in that family. First, if you check, is Hannah Furnace, just beyond the Centre County line. Not much there, although it later was a stop on the railroad down the valley.

Then, there is Port Matilda, Martha Furnace, and later Julian (pronounced Julie-Ann). If you look carefully as you travel along Route 220, you will see one of the historical signs calling your attention to the fact that you’re in the area known for a century for “Juniata Iron.”

Other Parts of Blair County

In addition to the furnaces and forges built along the Little Juniata and Spruce Creek, the Frankstown Branch of the Juniata also offered an excellent course for “motive power,” and places like “Ore Hill” were close by for iron ore. The Etna Furnace, near Williamsburg, was the first iron furnace in Blair County. It was built in 1809 and operated until 1876. Royer Mansion, also near Williamsburg, was the home of ironmaster Samuel Royer.

Allegheny Furnace, which can still be seen in Altoona, was built in 1811. Henrietta Furnace, near Martinsburg, also was a very active operation. The railroad went that far in order to pick up production from that furnace. Other furnaces on that branch of the river included the Frankstown Furnace and the Clinton Furnace.

Huntingdon County

Huntingdon County boasts one of the major preservation efforts in that Greenwood Furnace continues to draw thousands of visitors, few of whom may actually look at the iron furnace, but still it’s there, and it’s hoped that it will be throughout the future.

Paradise Furnace was largely eclipsed by the giant Raystown Lake project, but even so, there was an intriguing business there known as “Knoblough’s Bloomery.”

All Over America

Word of the famous “Juniata Iron” had spread all over the nation; however, the fast expansion had predictable results. Rapid inroads into our forests made the end inevitable. After a hundred years with a seemingly endless supply of wood for charcoal, plus the vast quantities of iron ore and unlimited water for motive power, the region no longer was the iron center of America.

No one had yet tied the use of coal with iron production and the fact that there were giant supplies of coal just over the mountain in Clearfield and Cambria Counties, and also in the Broad Top area of Huntingdon and Bedford Counties. So, the iron furnaces began to close, one by one, and the forges made their last iron products. An era was drawing to a close.

All’s Well That Ends… Well

As the hills and mountains of this area slowly became totally nude, the furnaces could no longer survive. The next step was the development of the giant open-hearth furnaces in Pittsburgh as well those as in the Bethlehem and Steelton areas.

As the smoke cleared out of these valleys people once again could see how beautiful it could be — even with its denuded hills and mountains. A generation later, trees had grown everywhere, and the scenery looked as it had in the days before the first ironmaster came this way. Given a chance, nature has a marvelous way of restoring things to what appropriately is called “a natural look.”

We thank Paul Heberling, retired Juniata College professor, who, in a chance conversation, mentioned how smoky these valleys were for a hundred years — a fact many never realized.

Share your memories

Leave a reply

Your email is never published. Required fields are marked with an asterisk.